bar one 6.0 lite shows different check code

Otherwise, a digital voltage scope used to monitor the sensor signals will be required. If the fault returns immediately, the scan tool and information from professional resources should be able to narrow down the problem. Otherwise, the vehicle will have to be driven until the problem becomes more persistent. If the fault is intermittent, then a visual inspection of the solenoid or the wiring may produce more results.

It is common to remove the solenoid which the code indicates to inspect the screen filter for sludge and manually activate it with a test probe. They may clear the code from the ECM and test drive the vehicle while monitoring the scan tool data to see if the fault returns or if it is intermittent.Įngine sludge with the oil system is very common for this fault code. A qualified technician can read the data from the scan tool to determine when and where the problem occurred or if it is still occurring.

P0010 is properly diagnosed with an advanced scan tool capable of factory sensor readings and codes (not just one from your local auto parts store) to start. How does a mechanic diagnose the P0010 code?

Affect engine performance at higher RPMs.

The P0010 code will produce a Check Engine Light on the instrument panel / dashboard.

Crankshaft or camshaft sensor malfunctions.

Worn timing components (chains, gears, guides).

Engine oil sludge (from lack of oil changes).

The Engine Positions System Performance Bank 2 code may have several causes: The code will illuminate the Check Engine Light and possibly reduce engine performance. From these sensor signals, the ECM controls ignition, valve lift, and fuel timing under various speeds and loads. The ECM uses sensors to detect the position of the crankshaft and camshaft(s). The timing issue is typically detected during higher RPMs of the engine when the ECM attempts to adjust valve lift during higher speeds.

P0010 is a generic OBD-II code indicating an issue with the engine control module (ECM) detecting a variation in the mechanical timing between the crankshaft and bank 1 camshaft. The P0010 code may also be accompanied with other codes such as: P0011, P0012, P0020, P0021, P0022, and maybe more. The P0010 code is associated with your engine’s mechanical variable valve timing.ĭue to emissions and performance standards, manufacturers have installed systems to increase the engine valve lift under certain conditions based upon load and performance.

Bar one 6.0 lite shows different check code